Watergun: parts arrival
As best I can tell, the missing parts to get the gun ‘shootable’ were a sear, sear pin, and firing pin retaining plate. In other words, these:
I am not a gunsmith by any stretch of the imagination…thats one of the reasons I shoot Glocks – you don’t ‘smith them, you just swap parts. At this point it looks like nothing needs fitting, which is good. But..the proof is in the function. We’ll get to that later. Alright…lets grab a punch, YouTube some disassembly/assembly videos, and get crackin’.
And once thats done…lets hand-cycle it, check the safety and trigger, and just generally play with it. It may look like the slide is a bit stiff but whats actually happening is that I’m trying to rack the slide without moving the gun or my hands out of the frame. Think its easy? Try it sometime.
Yeah, that rear sight is flopping around like Obama on a foreign policy question….but that’s a low priority at the moment. Next step is to take it to the range, tie it down, put a string to the trigger, and shoot the bloody thing.
And the sharp eyed viewer will notice that someone took the magazine safety out. Well, not really….it appears someone welded it to the trigger to deactivate it. :::SMH::: Whatever. Shooting this weekend. Hopefully the slide won’t go sailing through my brainpan.
For those keeping track:
Assuming everything works, and nothing cracks/breaks/explodes/flies off, I’ll send it down the valley for a coating of some kind and then, as the years go by, slowly start replacing parts with premium parts. Kinda make a sweet custom gun with a crappy, but interesting, finish. I’m pleased with how quickly this is coming together. :::Knocksonwood:::
Watergun update
Needs sear, sear pin, firing pin retaining plate, grips screw, rear sight spring, rear sight elevation screw.
That looks like about it. However, that does not mean some of the extant parts shouldn’t be replaced. The ejector should probably get replaced, and I should play it safe and replace all springs. Let’s see if we can just get the bloody thing assembled first. Interestingly, I can buy entire complete top ends for this thing for about $200 and just use the frame. But…I rather like the Been There Done That look.
So far I’ve got the plate, sear, and sear pin on the way for about $67 total so far.
In the meantime, the recoil assembly works, the magazine release works, the slide stop works, and the mainspring/hammer assembly work. Still looks like The Last Browning Out Of Pompeii though.
Article – Missing Oregon trucker emerges from wilderness after 4 days
GPS = Gets People Stranded
Im an advocate of Stay With The Vehicle… especially when the vehicle has 48′ of pallets of junk food to keep you fed. But…this guy marched out on his own, without taking any of the potato chips he was hauling, makes it back to his freaking house, and is sitting on the couch relaxing when his wife comes home from the sheriffs office where theyre coordinating a search-and-rescue.
Glad it worked out for him, but I’ll stay with the vehicle.
Codename: Watergun
A friend came by today to show me something interesting and slightly upsetting:
Ooohhh, thats not right! Nooo…..
It’s a Belgian P35 (or ‘Hipower’ to you), circa 1971, that was retrieved from the waters of Lake Michigan. The lake it is said, never gives up her dead….but guns are a totally different matter. Anyway..it’s mine now.
Condition is about what you’d expect but…the internal surfaces are surprisingly good. Barrel isn’t bad, and the deep pitting is mostly on non-critical surfaces. I think…I might try getting the missing the parts and getting this thing up and running. (And shooting it from a tire with a long string.)
First thing I need to do is make up a spreadhseet of all the parts necessary to make a P35 and then see what I have and what I’m going to have to find. Once thats done, if it proves safe to shoot, I’ll send it off and cerakote the holy crap out of it.
The story, I am told fourth-hand, is that this gun and the mags came out of a diving episode in Lake Michigan a few years ago. The gun ‘had the rust removed’ which, judging by the lack of wire brush marks and the thoroughness, must have been done using electrolysis. The gun was disassembled, apparently, for the process and some parts are clearly missing. I managed to put the recoil assembly together, get it into the slide and , after applying a tablespoon of CLP to the whole mess, got it sliding on to the frame, and then it seemed to cycle by hand just fine. Promising.
It also came with three what-used-to-be magazines. Now, thats a bit odd. See, if someone dropped this thing over the side off the boat doesn’t it seem a bit odd that there’s two spare magazines that fell over with it and made it all the way to the bottom lying next to it? Way I see it, the mags come with the gun for only two reasons: they were all in the same backpack/duffel when it was lost/tossed over the side or it was all on the same Sam Browne of whatever poor schmuck decided to breathe water. The mags will, I think, with new springs and some beadblast be just fine.
So….interesting project that I anticipate will take a year or two to wrap up since I’m going to try and do this with used parts inexpensively sourced off GunBroker and eBay. If it works out, it’ll be a gun with a great story.
Stuff that you really don’t wanna DIY in the apocalypse
There’s a scene in the novel “The Postman” where the main character mentions that there is a ranching community that rallies around it’s doctor and protects him at all costs. Since it’s the end of the world, that makes perfect sense. (and, yes, I’m aware of “Where there is no dentist”)
Having just spent the last three hours in a dental chair so I can eat food again, I hereby add ‘dentists’ to that list of People I Will Look Out For In The Apocalypse.
Hot dental hygienists are 50/50 depending on how we’re doing on food.
I hate going o the dentist, but it’s a necessary suffering. Some people seem to enjoy it though….
Fenix E11/E12
A number of years ago I was in REI and, as I was waiting in line for the checkout, there was a bin of closeout merchandise. On a whim I picked up a small LED flashlight and have been mightily impressed with it ever since.
The flashlight, a Fenix E11, has been supplanted by the newer E12 model which features a tap switch on the tailcap to adjust brightness levels. In pretty much all other regards, its the same as the E11.
When I got started in survivalism, the go-to flashlight was the MagLite. Big, beefy, and built for cracking skulls it was pretty much everyone’s first choice. Time goes by and with the development of LED technology we now have pocket flashlights that put out more light using AA batteries than the old-style MagLites ever did with D batteries.
When you really go all in and decide to get some top of the line photon blasters you often wind up at SureFire (or, to a lesser degree, Streamlight). SureFire is great stuff and I have a bunch of their weaponlights….but they are spendy. On the other hand, if you want to go all ‘poverty prepper’ and grab a fistful of $1 LED flashlights from a plastic fishbowl in the checkout line at WalMart….well, thats great for looking for the keys you dropped behind your desk but durability might be an issue.
SO…middle of the road – durable and efficient enough to withstand use and abuse, cheap enough that if you lose it you’re not heartbroken, but not so cheap that when you need it there’s a 50/50 shot it won’t work. As I discovered, this little light fits the bill perfectly.
How much do I like and recommend? Well, putting my money where my mouth is:
I keep several of these things because theyre so dang handy. Let’s hit the high points:
Battery compatibility – my battery logistics call for only three batteries: AA, D, and CR123. This light takes one AA battery, making it compact and efficient. I’ve taken to using rechargeable Eneloops for devices I foresee changing batteries in regularly. I do this for economics…I’ll use the rechargeables and save the stored lithium AA’s for when it really counts. Battery life seems pretty good. I change the battery out every month just to keep things at maximum efficiency.
Output – Advertised is about 115 lumens. For indoor use I find it to be amazingly bright. Outdoors its pretty good for the immediate area but it’s not a long-distance light…thats where the LED 3D MagLite comes in handy. The older E11 has two brightness settings, toggled by twisting the head of the light. The lower setting is perfect for close-in work like reading notes, ro doing work with your hands as you hold the light in your mouth. The E12 uses a tap switch on the tailcap to go through a couple different brightness settings.
Size – Perfect size for keeping in your pants pocket. I carry one around as my ‘everyday carry’ pocket junk and do not find it to be the least bit obtrusive. (But I do find it amazingly handy.)
Survivability – It’s gone through the washing machine, been dropped on concrete, sat on, rolled off tables, and has not flickered once. Theres a small attachment point for a lanyard and I highly recommend using a lanyard to keep the light attached to your gear in such a way as to allow you to find it in a hurry. I keep one in my pack with the lanyard attached to a little plastic carabiner so I can find it in total darkness.
If I had the money, I’d have a pocketful of SureFire but, in practice, I really haven’t felt ‘undergunned’ with this thing as far as pocket lights go. I would definitely take it over the AA MiniMag light or some discount bin special. For the particular niche that I bought these for (compact, pocket-size, affordable, personal light that I can carry everyday) they are darn near perfect. Highly recommended.
Ruger PC9…the original
Where there’s a will (and poor impulse control) there’s a way.
I’ve been wanting an original Ruger PC9 for several years now. They discontinued them a few years back and the prices skyrocketed. It was getting to the point that all the ones I found on GunBroker were traveling at an altitude of about $800-1000. This is simply stupid money for a carbine that virtually no one bought when it first came out, is simple blowback, and takes a proprietary magazine for a gun that is most commonly found in gun buyback bins and evidence lockers.
But..I wanted one.
I figured that with the reintroduction of the greatly evolved version of the PC9 the prices for the original ones might go down. It appears they have. This particular carbine, with one soon-to-be-thrown-away USA Brand magazine, was $500. Now, for $75 less I could have bought a brand new Ruger PC9 takedown that takes Glock magazines. So..why this original one? Well, mostly because I’ve a dozen P-series 9mm’s tucked away in the safe and I want a carbine to go with them. I think that two pistols, the carbine, half a case of ammo, a dozen magazines, a couple holsters, a cleaning kit, and some other support gear will fit nicely in a Pelican case to tuck away somewhere for that (very) rainy day.
I still very much plan on getting the new PC9 takedown carbines, especially since they use Glock mags and would therefore make an excellent companion to my Glock pistols. But getting the original carbine was on my list and the opportunity finally came together.
It is interesting to note that despite the small size of the carbine, it is deceptively heavy. Not surprising since it is, basically, just a modern version of the Winchester Model 1907….with a rather large counterweight housed in the forend of the gun. In fact, looking at exploded diagrams between the two, it’s hard not to think someone at Ruger might have played with the 1907 and thought “Time for a reboot”.
By the way, for you youngun’s out there, Marlin also had their hat in the ring with a pistol-mag-compatible carbine…the Camp 9 and Camp 45. The former took S&W mags and the latter took 1911 mags. One guess which model commands big bucks today. They were great guns, with Old-Marlin quality, but had a slight design flaw where, once the plastic buffer at the back of the stock ate itself from use, the reciprocation of the bolt beat the stock to pieces. (Aftermarket buffers are available.) After replacing a ton of stocks under warranty, and with the Assault Weapons ban coming in, Marlin dropped both guns. The 9mm turn up far more frequently than the .45 ACP….people hold onto those things with both hands.
As long as we’re flogging this particular deceased equine, I’ll also point that in the last twenty years we’ve had a handful of other pistol-caliber carbines that took popular(ish) handgun mags…incudingbut not limited to: KelTec, JR Carbine, HiPoint, Spanish ‘Destroyer’, Beretta, a handful of AR-ish 9mms that took Glock mags, and a host of pistol-to-carbine conversions.
But…while some of those are better than the Ruger, none of them take the same magazine as the Ruger…and that’s the bell I was trying to ring.
So that happened…..
Spec-Ops closeout
I loves me a bargain. Being a survivalist is a resource-intensive lifestyle when you’re getting started. Once you’v been at it a while, and gotten the major purchasing sprees out of the way, it’s really just a little hear-and-there upgrades and ‘nice to have’s. The guys at Spec-Ops are having a closeout on two products that I’ve found to be quite good. They are:
A three-mag MOLLE/PALS panel in your choice of camo for $12.50
I have an extra G3 bayonet without a scabbard laying around, so this sheath is perfect for finding a home for that bayonet and keeping it with the bag of G3 support gear.
Floor porn!
I’ve used the Spec-Ops stuff for years and have been extremely pleased. It’s American-made (unlike Maxpedition and most Blackhawk gear), seems pretty durable, and is pretty basic no-frills stuff. I’ve been carrying their messenger bag as a bookbag to school for the last two years and have had absolutely no issues with it. I’ve been using their discontinued SOB buttpacks (make your own joke) for the last decade and found them remarkably rugged and durable.
Their designs are, for the most part, unimaginative but the quality and price is pretty hard to beat. And at closeout prices, even better.
